5 Tips For Extending The Life Of Your Vege Polisher™ Brushes

Extend the life of your Wyma Vege-Polisher™ brushes by taking time to look after them properly. With regular care and maintenance, you will save time and money.

1. Reverse Vege-Polisher™ Direction 

A key feature of the Wyma Vege-Polisher™ is the ability to reverse the direction of the drum and brush motors so the machine runs in the opposite direction. Reversing the machine regularly is the best way to extend brush life.

Over time, the brushes will bend in the direction of produce flow. When you reverse the machine, this will be counteracted as the produce flow changes direction.

Wyma recommends changing machine direction every three months (once per season).

2. Set Your Outfeed Gate Correctly

The position of your outfeed gate directly affects how long produce stays inside the drum. When produce stays in the drum for a length of time, the weight of the produce can cause brushes to splay and warp.

Make sure the position of the outfeed gate is set so produce is not in the drum for longer than needed. See your Vege-Polisher User Manual for specific information on gate setting.

Note: When you reverse the running direction of the machine, the gate position will need to be mirrored.

3. Keep Brushes Clean

Thoroughly clean your equipment every day. Spend time focussing on getting the brushes clean. Dirt build-up causes brushes to wear quickly. When brushes are clean, they are more effective at polishing produce. Clean equipment is also safer and easier to inspect.

4. Avoid Harsh Chemicals for Cleaning

Using harsh chemicals can affect the shape and effectiveness of your brushes. Harsh chemicals will make the brushes wear quicker.

5. Use Cool Water for Cleaning

Always use cold or lukewarm water when cleaning your brushes. Hot water makes brushes soften and they may lose their shape.


Top 5 Tips For Extending The Life Of Your Post-Harvest Equipment

Taking time to look after your equipment will extend the life of your biggest investments. With regular care and maintenance, you will save time and money.

Read Wyma’s top 5 tips for extending the life of your Post-Harvest equipment.

1. Keep Equipment Clean

Take time each day to clean your equipment thoroughly. Trapped dirt causes parts to malfunction, leading to costly equipment break-downs. Clean equipment is also safer and easier to inspect. When parts are clean, you can easily see if they are running correctly.

It is also a good idea to keep your site as clean as possible. Equipment should be sheltered from wind and rain (where possible) to help prevent rust and rot.

2. Inspect Equipment Regularly

Make sure you have a comprehensive inspection and maintenance schedule. If you take time to check your equipment regularly, you will be able to fix small issues before they become major problems.

Perform preventative maintenance to replace high-wear parts before they break down. This will save you time and money. Some parts that should be checked often are: bearings, seals, gaskets, belts, rollers, pulleys, electrics, etc.

3. Staff Training

It is important to have trained staff on-site. They will know if equipment is running correctly and will be able to trouble-shoot effectively.

It is worthwhile to train everyone who is working on or near equipment so they know what equipment should look like - and sound like - when it is running well. Problems will be found early if you have plenty of trained staff paying attention.

4. Lubrication

Lubricants help moving parts perform better. They reduce friction and extend part life. Include ‘part lubrication’ on your maintenance schedules.

Make sure you are using the right lubricants. There are different lubricants for different parts, so check the manufacturer’s recommendations.

5. Use High Quality Spare Parts

If you want great performance and long life from your equipment, use high quality spare parts. Do not replace parts with similar, but lower quality parts. Low quality parts will not only wear faster, but can also cause damage to your equipment if they are not completely fit-for-purpose.

Check with your supplier to make sure you use the spare parts they recommend.