Vege-Polisher™ (V2B Series)

  • Description
  • Key Features
  • Brochures
  • Videos
  • The Wyma Vege-Polisher™ is the most effective vegetable polishing system in the world, suitable for washing and polishing a variety of produce including potatoes, carrots, parsnips, swedes, turnips, beetroot, celeriac etc... More than 800 polishers have been sold since the mid 1990s, into 40+ countries around the globe.

    The polishing performance is achieved with: Rotary brush technology that was invented by Wyma in the 1990s. This technology is based on the traditional drum washing agitation. However, the drum is made from rows of brushes that counter rotate to the drum. This separate drum and brush process offers control over the polishing intensity. Exclusive and customisable brushes. Wyma match brush specifications to produce, operating conditions and polishing requirements.

    The Wyma Vege-Polisher™ can considerably improve the appearance of your fresh vegetables, resulting in a greater percentage of packed premium produce and an increased presence on retailers' shelves. Our experience with the rotary brush drum technology and brush specifications, combine to ensure vegetables are washed and polished to the highest retailing standards.

    Produce enters through a large in-feed chute and is directed onto soft nylon brushes. Inside the drum, produce is sprayed via two water pipes connected to fresh and/or recycled water. The polishing intensity can be controlled by managing drum and brush rotating speeds and adjusting out-feed gate position. Produce is out-fed down a PVC chute with minimal drop to ensure a smooth transition to your next piece of equipment.

    Models Approximate capacity * Brush rows
    WPP2412 5 to 10 T/hr (11 to 22,000 lb/hr) 12
    WPP3014 8 to 20 T/hr (18 to 44,000 lb/hr) 14
    WPP3016 10 to 25 T/hr (22 to 55,000 lb/hr) 16
    WPP3518 15 to 35 T/hr (33 to 75,000 lb/hr) 18

    * Depending on produce and operating conditions

    • Highly reliable V and synchronous belt drive systems
    • Control of the polishing intensity with separate variable speed controls for the brush and drum rotations
    • Hinged belt tensioning system for quick and simple tension adjustment
    • Easy access for cleaning and maintenance via sliding doors, side removable brush shafts and light-weight quick release panels
    • Internal cleaning bars to reduce manual cleaning
    • Range of Clean-In-Place features to provide some automation of the cleaning and sanitising procedure
    • Manual or automated out-feed gate to control produce depth
    • Ability to customise the brush configuration to suit your produce and maximise polishing effectiveness
    • Built strongly to stand the test of time and to provide a low total cost of ownership
    • Enhanced bearing protection features to maximise the lifespan of your equipment
    • Fresh water and recycled water spray bars inside drum
    • Range of water recycling systems to minimise water consumption rates
    • Numerous safety components such as door locks and drum retainer

CONTACT WYMA